| |
|
| |
| |
|
| |
| |
|
| |
 |
''Sinicon WaterSwitch effectively monitor and controls water/liquid levels in the Overhead Tank, Sump, Well* etc. It prevents Overhead Tank from overflowing and also over pumping of Sump, Well etc. It allows the user to be free from the botheration of switching the electric water pump ON and OFF and makes water available round the clock.'' |
|
| |
| |
|
WaterSwitch Features & Functions |
|
| |
 |
Fully automatic operation.
|
|
Switches Water Pump ON when Overhead Tank is empty and Switches Water Pump OFF when Overhead Tank is full.
|
|
Switches Water Pump Off when Sump / Well is empty and allow pump to run only when the Sump / Well is filled up to the set limit.
|
|
Extremely easy to install.
|
|
Fit and forget type and no routine maintenance required.
|
|
| |
| |
|
| |
 |
''Sinicon WaterSwitch System effectively monitor and controls water/liquid levels in the Overhead Tank, Sump, Well* etc. It prevents Overhead Tank from overflowing and also over pumping of Sump, Well etc. It allows the user to be free from the botheration of switching the electric water pump On and Off and makes water available round the clock.
In addition to the above basic function (as in the WaterSwitch), the WaterSwtich Controller in the WaterSwitch System prevents pump running when Sump is empty and low voltage, high voltage and dry run situation, thus avoiding damage to motor resulting increased availability, cost saving in electricity and maintenance.''
|
|
| |
| |
|
WaterSwitch System Functions and Features |
|
| |
|
Fully automatic and manual operation.
|
|
Switches Water Pump ON when Overhead Tank is empty and Switches Water Pump OFF when Overhead Tank is full.
|
|
Switches Water Pump OFF when Sump/Well is empty (even while the Overhead Tank is empty) and allow pump to run only when the Sump/Well is filled up to the set limit.
|
|
Extremely easy to install and operate.
|
|
Fit and forget type and no routine maintenance required
|
|
Single switch operation for Auto/Off-Reset/Manual Operations.
|
|
Split timer for switching the pump ON and OFF in two different time slot is available in model 9526BT2 only
|
|
| |
| |
|
| |
|
Description |
|
|
|
|
|
|
WaterSwitch
WC 9525 |
WaterSwitch
WC 9525X |
SwitchMate
WC 9527 |
Controller
WC 9526B |
Controller
WC 9526BT |
Controller
WC 9526BT2 |
Model |
WaterSwitch |
WaterSwitch X |
System
IA & IIA |
System
ID & IID |
System
IDT & IIDT |
System
T2 |
Operating Voltage (AC) |
110V/240V |
110V/240V |
155V to 270V |
155V to 270V |
155V to 270V |
155V to 270V |
Operating Current for Load |
Resistive Load |
15 Amp |
15 Amp |
15 Amp |
15 Amp |
N/A |
N/A |
Motor Rating |
Direct Load (1 Phase) |
1 HP |
1 HP |
1 HP |
1 HP |
N/A |
N/A |
Indirect Load*** (1 or 3 Phase) |
Any Size |
Any Size |
Any Size |
Any Size |
Any Size |
Any Size |
| Operating Method |
Float, Internal |
Float, External |
- |
- |
- |
- |
Dry Run Protection |
No |
- |
No |
Yes |
Yes |
Yes |
High Voltage Cut-Off (AC) |
No |
- |
No |
260V |
260V |
260V |
Low Voltage Cut-Off (AC) |
No |
- |
No |
160V |
160V |
160V |
Starter Timer |
No |
- |
No |
No |
Yes |
No |
Dimension |
Height (mm) |
- |
- |
126 |
180 |
180 |
180 |
Width (mm) |
- |
- |
100 |
130 |
130 |
260 |
Depth (mm) |
- |
- |
51 |
55 |
55 |
55 |
|
| |
| |
|
Controller and Indications |
|
| |
|
| |
| |
|
SwitchMate and Indications |
|
| |
|
| |
| |
|
WaterSwitch System Configurations / Offerings |
|
| |
Configuration |
WaterSwitch |
DryRun Switch |
SwitchMate
WC9527 |
Controller
WC9256 B |
Controller
WC9256 BT |
Remarks |
System IA |
1 |
- |
1 |
- |
- |
For Single tank(overhead tank / Sump) |
System IIA |
2 |
- |
1 |
- |
- |
For Double tank (overhead tank and Sump) |
System ID |
1 |
1 |
- |
1 |
- |
For Single tank with HV/LV/Dry run protection |
System IID |
2 |
1 |
- |
1 |
- |
For Double tank with HV/LV/Dry run protection |
System IDT |
1 |
1 |
- |
- |
1 |
For Single tank with HV/LV/Dry run protection |
System IIDT |
2 |
1 |
- |
- |
1 |
For Double tank with HV/LV/Dry run protection |
System T2 |
Twin timer based water management system for Apartments/Flats etc. (controller WC 9526BT2) |
|
| |
| |
|
| |
YOUR REQUIREMENTS |
WE OFFER |
1 |
Basic ON/OFF function of water pump for filling water in overhead tank. |
WaterSwitch (1 No)
To be installed in overhead tank. |
|
2
|
Basic ON/OFF function of water pump for filling water in the overhead tank with dry run protection from sump empty. |
WaterSwitch (2 Nos)
To be installed one each in overhead water tank and sump. |
|
3 |
Basic ON/OFF function of water pump for filling water in overhead tank with indication and control. |
System IA, consists of 1 No. WaterSwitch and 1 No. Switch-Mate. |
|
4 |
Basic ON/OFF function of water pump for filling water in the overhead tank with dry run protection from sump empty with indication and control. |
System IIA, consists of 2 Nos. WaterSwitch and 1 No. Switch-Mate. |
|
5 |
Basic ON/OFF function of water pump for filling water in overhead tank with indication and control, low voltage, high voltage protection and also dry-run protection from motor jam, pipe leakage, foot valve block etc.. |
System ID, consists of 1 No. WaterSwitch, 1 No. DR Switch and 1 No. Controller. |
|
6 |
Basic ON/OFF function of water pump for filling water in the overhead tank with dry run protection from sump empty with indication and control, low voltage, high voltage protection and also dry-run protection from motor jam, pipe leakage, foot valve block etc.. |
System IID, consists of 2 Nos. WaterSwitch, 1 No. DR Switch and 1 No. Controller. |
|
7 |
Basic ON/OFF function of water pump for filling water in overhead tank with indication and control, low voltage, high voltage protection and also dry-run protection from motor jam, pipe leakage, foot valve block etc..(With timer for starter capacitor). |
System IDT, consists of 1 No. WaterSwitch, 1 No. DR Switch and 1 No. Controller. |
|
8 |
Basic ON/OFF function of water pump for filling water in the overhead tank with dry run protection from sump empty with indication and control, low voltage, high voltage protection and also dry-run protection from motor jam, pipe leakage, foot valve block etc..(With timer for starter capacitor). |
System IIDT, consists of 2 Nos. WaterSwitch, 1 No. DR Switch and 1 No. Controller. |
|
|
| |
| |
| |
