Welcome To Sinicon Controls Private Limited::::::::::::Automation Products

Products >> Automation Products >> Power Back-Up Management

	Features
	Specification
	Indicative Load Details for EPS Sizing
	Indicative Battery Back - up Time Chart

Sinicon Air Conditioner Stabiliser with fs circuit

Voltage Stabilizer for Air Conditioners, with FS Circuit to give you peace of mind with uncompromised protection for your Air-Conditioner.

Features

	Wall mountable. Suitable for concealed wiring.
	Prevents high voltage reaching to the Air Conditioner.
	Isolates the Air Conditioner from the mains supply when the voltage reaches the set lower limit.
	Maintains the output voltage to the Air Conditioner in the safe limits.
	Switches ON the Air Conditioner on power supply returning to safe voltage range.
	Immediately switches ON the Air Conditioner if the stabiliser waS Switched OFF off for more than 3 minutes. However if the stabiliser was switched OFF for only 2 minutes, it will switch ON the Air Conditioner only after 1 minute time delay. this time delay is provided to ensure long life to the Air Conditioner.
	Attractively designed, powder coated cabinet will enhance beauty of your interiors.
	Smartly designed circuit to cut off power to the Air Conditioner in case of component failure.
	Ensures reliable and trouble free service for many years.

Specification

Model	Ratings	Rating of AC	Input Voltage	Output Voltage	Low Voltage Cut off	High Voltage cut Off
RL3	3 KVA	1 Tonne	150-290 V	200-250v (From 175-285V)	150 V Input	290 Input
RL4	4 KVA	1.5 Tonne	150-290 V	200-250v (From 175-285V)	150 V Input	290 Input
RL5	5 KVA	2 Tonne	150-290 V	200-250v (From 175-285V)	150 V Input	290 Input
CT4	4 KVA	1.5 Tonne	165-275 V	200-250v (From 195-270V)	165 V Input	275 Input
CT5	5 KVA	2 Tonne	165-275 V	200-250v (From 195-270V)	165 V Input	275 Input

Indication

	Indicates output voltage is available.
	Indicates when the delay timer activated.
	Indicates the output is cutoff due to over voltage.
	Indicates the output is cutoff due to low voltage.
	Indicates when the mains to the stabilser is available.